Layout an RF Design in about an hour?!! Sure !!

Layout any RF or Microwave design with full intelligence on all parts, all the time.

A set of software tools for the unique graphical and electrical requirements of radio frequency (RF) / Microwave / Wireless printed circuit boards and ceramic substrates. Specialized Functions Dramatically Reduce Layout time.  Savings Of Up To 90% in Design Time Have Been Achieved.  

Key Features Include:

1. RF vias are made with additional vias as shields around the signal via using parametric controls
   

2. Length tuning of net lengths using arcs, accordion or trombone tuners
   

3. Microwave chamfers are auto created with a single pick using the Tchamfer command
   

4. Via peppering at any pitch with staggered option and suppression under components places thousands of ground plane vias in seconds
   

5. Compatibility with Agilent - ADS, Ansoft - HFSS, Applied Wave Research - MWO and other simulators for a seamless design solution (over 100 identical parts made in our system to match ADS and MWO parts) See our Third Party Links Page
   

6. All custom geometries made with boundaries are supported by full connectivity (LVS) and DRC checks
   

7. Fully flexible plane generation has no limitations

Automate the creation of complex embedded circuits with:

• Parametric generation of imbedded circuits, Dividers, couplers, spiral inductors, radial stubs, etc.

• Any footprint can be made with any shape 

• Via peppering makes via arrays connecting identical plane nets, on multiple layers and automatically removes vias that would connect to the wrong net

• Path tuning for phased array antennas

• Support for embedded components and circuits inside blocks

• Full net list (LVS) and DRC checking functionality on any shape and at any hierarchical level

• Creates coplanar ground shields with coplanar vias, even on arced entities automatically

• Automatic placement of all ground ties on SMT parts, on all layers and nets with automatic tie segment / via reduction based on DRC results

• Boundary ground planes with progressively filleted corners and variable individual gap control on every entity

• Users have told us that our Boundary Plane generation software is the best available

• Unlimited geometries and accuracy 10 ^-10 in any units system

• Automatic placement of all ground ties on through hole parts, on all layers, with automatic tie spoke deletion based on DRC results

• Split plane edges are automatically generated from simple easy to draw dividers